We can supply round bars with an external diameter of 20 mm up to 850 mm in different types of steel and alloys.
The steels we sell are:
- carbon
- tempered
- case hardened
- austenitic and martensitic stainless
- for bearings
- for springs
- for hot and cold tools
- for nitriding
Services we offer
- steel cutting: fast, precise and with reduced allowances with our automatic saws
- labeling for traceability of pieces
- deliveries in 24 hours from our stock of bars, we manage your emergencies
- safety packaging
- fast transport and delivery with our means
We are always at your service and satisfy even the most demanding customers.
List of material that we have in stock, cert 3.1 – made in Europe
Nichel Alloys:
Alloy 200 – UNS N02200 – 2.4066 – ASTM B160 Alloy 200
Alloy 201 – UNS N02201 – 2.4068 – ASTM B160 Alloy 201
Alloy 330 – UNS N08330 – 1.4864 – X12NiCrSi36-16
Alloy DS – BS 3076 NA18 – 1.4862
Alloy 400 – UNS N04400 – 2.4360 – ASTM B164 Monel Alloy 400 – NiCu30Mn3Ti
Alloy K500 – UNS N05500 – 2.4375 – ASTM B865 Monel K500
Alloy 600 – UNS N06600 – 2.4816 – ASTM B166 Inconel 600NiCr15Fe
Alloy 601 – UNS N06601 – 2.4851 – ASTM B166 Inconel 601 – NiCr23Fe
Alloy 625 – UNS N06625 – 2.4856 – ASTM B446 Inconel 625 – NiCr22Mo9Nb/NU22DNb
Alloy 718 – UNS N07718 – 2.4668 – NiCr19NbMo – ASTM B637 Inconel 718
Alloy 800H – UNS N08810 – 1.4876 – 1.4958 – X5NiCrAlTi31-20
Alloy 800HT – UNS N08811 – 1.4959
Alloy 825 – UNS N08825 – 2.4858 – NiFe30Cr21Mo3 – Astm B425 Inconel 825
Alloy 20 – UNS N08020 – 2.4660 – Astm B574 Alloy20
Alloy C 22 – UNS N06022 – 2.4602 – NiCr21Mo14W
Alloy C 276 – UNS N10276 – 2.4819 – NiMo16Cr15W – Astm B574 Hastelloy C276
Alloy CuNi 90/10 – UNS C70600 – 2.0872
Alloy K-500 – UNS N05500 – 2.4375 – NiCu30Al3Ti
Alloy X – UNS N06002 – 2.4665 – Hastelloy X
Alloy 925 – UNS N09925
PH Grades:
17-4PH – AISI 630 – UNS S17400 – 1.4542 – X5CrNiCuNb 16-4
17-7PH – AISI 631 – UNS S17700 – 1.4568
15-5PH – UNS S15500 – 1.4545
13-8Mo PH – UNS S13800 – 1.4534
Duplex & Super Duplex:
F44 – A182 F44 – UNS S31254 – X1CrNiMoCuN20-18-7 – 1.4547
F51 – A182 F51 – UNS S31803 – X2CrNiMoN22-5-3 – 1.4462
F53 – A182 F53 – UNS S32750 – X2CrNiMoN25-7-4 – 1.4410
F55 – A182 F55 – UNS S32760 – X2CrNiMoCuN25.6.3 – 1.4507
F60 – A182 F60 – UNS 32205 – 1.4462
Carbon & Low alloy Grades:
ASTM A350 LF2 – ASTM A350 LF3 – ASTM A350 LF6 – ASTM/ASME A105 – A105N – S355 – ASTM A694 F42 – ASTM A694 F52 – ASTM A694 F60 – ASTM A694 F65 – ASTM A182 F1 – ASTM A182 F5 – ASTM A182 F9 – ASTM A182 F11 – ASTM A182 F12 – ASTM A182 F22 –ASTM A182 F91 – ASTM A182 F92 – AISI 4130 – AISI 4140 – AISI 4145 –AISI 8630 – 25CrMo4 – 30NiCrMo4 – 34CrNiMo6 – 39NiCrMo3 – 40NiCrMo7 – 42CrMo4 – 18NiCrMo5 – 18NiCrMo7/6 – 16Mo3
Ferritic / Martensitic / Austenitic Stainless:
AISI 309 – AISI 309S – AISI 310 – AISI 310S – AISI 303 – AISI 304 – AISI 304L – AISI 316 – AISI 316L – AISI 316LN – AISI 316Ti – AISI 321 – AISI 347 – AISI 347H – AISI 410 – AISI 416 –AISI 420 – AISI 430 – AISI 430F – AISI 431 – AISI 440B – AISI 440C – 904L – F6NM – FV520B – XM19/HR
Titanium:
Grade 1 – Grade 2 – Grade 5 – Grade 9 – Grade 12
Maraging:
C250 – C300 – C350
Alluminium / Bronze / Copper Alloys:
Def stan 02-833 – DTD900 / CuNi3Si – CW112C – C70600 – CA104 – C63000 – C63200 – NES833 – PB1 – LB2 / LB4 / PB2 – SAE660 / C93200 – CuSn5Zn5Pb5-C – CuSn5Zn5Pb5-C – CuSn12-C – CuSn10Pb10-C – CuSn7Pb15-C – CuAl10Fe5Ni5-C – CuAl10Fe2-C
Brass:
OT58 (CW614N) – OT58 (CW617N)
Cast Iron:
G 25 – GS 400 – GS 500
